行业新闻
Industry News
HOME  >  NEWS  >  Industry News
What is the noise level of multi-stage centrifugal fans
Time:2025-09-20 Size

The noise level of multi-stage centrifugal fans is affected by design, operating conditions, and maintenance status. The following is a comprehensive analysis:

1、 Noise Range and Influencing Factors

Conventional noise level

Under standard operating conditions, the operating noise of multi-stage centrifugal fans is usually between 85-100 decibels, and optimized design models (such as D-type) can reduce it to almost no noise outside the machine room. Compared to single-stage centrifugal fans (50-85 decibels), multi-stage models have higher noise levels due to the large number of impellers and complex compression processes.

Key influencing factors

Speed and wind pressure: For every 1000r/min increase in speed, the noise level increases by approximately 3-5 decibels.

Impeller balance: Imbalance of 0.5g mass deviation will produce significant vibration noise at 1500r/min.

Installation environment: Loose foundations or resonance can amplify noise by 10-15 decibels.


2、 Noise reduction measures

Equipment optimization

The use of a three element flow impeller design can improve efficiency and reduce aerodynamic noise.

Installing a muffler or soundproof box can reduce high-frequency noise by 10-20 decibels.

Maintenance management

Regularly clean the impeller for dust accumulation to avoid imbalance (recommended every 3-6 months).

Check the bearing clearance (≤ 0.03mm) and replace the lubricating grease in a timely manner.

3、 Standards and Health Risks

Chinese standard: The noise limit for fans in industrial areas is 55 decibels (during the day), and multi-stage centrifugal fans need to meet the standard through sound insulation measures.

Health effects: Long term exposure to environments above 85 decibels may cause hearing loss or cardiovascular disease.

If you need to further understand the noise data of specific models, you can refer to the testing report provided by the manufacturer or consult professional noise reduction solutions.